enevex® TP36 Textile Protection
With enevex® TP36 Textile Protection, we can effectively protect all types of textiles from water, dirt, and stain formation. Appearance, color fastness, and tactile properties are in no way affected. The textile is easy to maintain and remains breathable. Damage from staining, discoloration due to watery and oily dirt is a thing of the past. enevex® TP36 Textile Protection provides long-lasting protection and is stable over time, with a functional life of up to 24 months. Washing cycles of up to 50 washes at 30°C (depending on the product) are possible. Areas of application: conventional textiles such as clothing, home textiles, seat covers, carpets, convertible tops, awnings, and more.
Properties:
- Permanent protection
- Chemical and environmentally resistant
- Easy-to-clean surface
- Hydrophobic, oleophobic, and dirt-repellent protective film
- Breathable
- Natural softness/flexibility
- Very good skin compatibility
- Dermatologically tested by Dermatest® and rated as “very good”
Preparation: The textile must be thoroughly cleaned and free from impregnation agents before sealing. Use enevex® TP36 Textile Protection for this. After cleaning, the textile must be completely dry. Application: The surface must be fully saturated. Massage the product into the textile and let it dry afterward. Depending on the amount applied, a temporary darkening effect may occur. enevex® TP36 Textile Protection can also be applied by dipping or spraying. Consumption depends on the absorbency of the fibers. Drying: After complete air drying, the product will unfold its effect. The drying process can also be accelerated using a fan heater, provided the textile is suitable. Thermal drying increases effectiveness. Re-treatment: If the effect diminishes, re-treatment can be performed as with the initial application, as long as the textile is not too heavily soiled. Lifetime: Depending on the textile fiber, intended use, and load, up to 24 months or a maximum of 50 wash cycles at 30°C. Weatherproof after: 2 to 3 hours at +20°C. Fully cured after: approx. 24 hours, depending on the textile and ambient temperature. Caution: Do not apply the product in direct sunlight and do not let it dry.
| Consumption: | 80 to 150 ml per m² (always according to the type of textile) |
| Application temperature: | +5°C ile + 40°C |
| Weatherproof after: | 2 to 3 hours at +20°C |
| Fully cured: | After 24 hours always according to the textile and ambient temperature |
| Storage and shelf life: | At least 12 months at ambient temperature in tightly sealed original container |
| Areas of use: | Cars, Motorbikes, Caravans, AERO, Boats and Yachts, Buses and Vans, Industry and Crafts, Household, Trains and Trams |
Note after use: Surfaces treated with sealers should principally always be cleaned as gently as possible, to avoid damaging or even eliminating the product properties. Avoid using strong cleaning agents with high pH or a large content of solvent.
Accessories: enevex® Textile Cleaner, enevex® TP36 Leather and interior brush, enevex® TP36 professional hand sprayer
General Area Cleaning and Care Products
Değerlendirmeler
Henüz değerlendirme yapılmadı.