Enevex® ys’P Marine Surface Protection

enevex® ys’P Marine Surface Protection

enevex® ys’P Marine Surface Protection is the latest high-quality product for various surfaces on watercraft. Due to its low material consumption, enevex® ys’P Marine Surface Protection is particularly suitable for large surface applications. It effectively protects against damage caused by resins, salts, acids, weather conditions, and mechanical impacts. Additionally, it is highly heat-resistant up to a maximum of +1800°C, ensuring that the fire properties of the surface remain unchanged. enevex® ys’P Marine Surface Protection also possesses “self-healing” properties. During development, we prioritize optimal compatibility with human health and the environment. Application Areas: Suitable for all gelcoat and painted surfaces on watercraft such as speedboats, yachts and sailboats. Also applicable to pure plastic surfaces on water sports vehicles.

Properties:

• Free from siloxane, fluorine, Teflon, wax, silicone, and carcinogenic additives
• UV- and weather-resistant
• Saltwater-resistant
• Anti-graffiti effect and protection against almost all acids, bases, and organic solvents
• Temperature-resistant from -50°C to +1090°C
• Resistant to chemicals
• Non-flammable and non-corrosive
• Increases hardness and scratch resistance, with very high abrasion resistance
• Provides corrosion protection
• Easy-to-clean

Application:

• Clean the surface with enevex® AT10 Special Cleaner and neutralize it with Pre-Cleaner.
• Place the application cloth over the applicator.
• Apply 12-18 drops of enevex® ys’P Yacht Surface Protection onto the application cloth and spread it evenly over the surface.
• Let the product evaporate for 1-2 minutes.
• Remove any excess using the enevex® CT23 Ceramic Towel.
• The product can also be optimally applied using fine spray application. On rough and absorbent surfaces, it can be applied by spraying or rolling.
• The product is dust-dry after 120 minutes.
• Important: Do not apply directly under sunlight. Protect the product from direct sunlight and frost.
• Once cured, the coating is resistant to acids, alkalis, and solvents with a pH value between 2 and 13.

Important:

• After application, protect the surface from dirt and moisture for at least 18 hours.
• Full curing time at room temperature: approximately 6-8 days.
• Separate drying can reduce the curing time by 2-3 days.
• During curing, the surface must not be subjected to friction.