Enevex® WH31 Wet Coating “with hydrophobic effect”

Enevex® WH31 Wet Coating is a specially developed, silicone-free quick sealant for wet surfaces. It is suitable for all well-used and new surfaces such as paint, plastic, and glass on automobiles, caravans, and yacht exteriors. The simple and quick application guarantees the best gloss results and a highly water-repellent property. For best results, the surface to be sealed should be cleaned first (car wash with enevex Premium Shampoo). It is also ideal for maintaining enevex-sealed surfaces. Areas of application: Vehicles, Motorcycles, Caravans and campers, Yachts and boats.

Enevex® WH31 Wet Coating

enevex® WH31 Wet Coating is a specially developed, silicone-free quick sealant for wet surfaces. It is suitable for all well-used and new surfaces such as paint, plastic, and glass on automobiles, caravans, and yacht exteriors. The simple and quick application guarantees the best gloss results and a highly water-repellent property. For best results, the surface to be sealed should be cleaned first (car wash with enevex Premium Shampoo). It is also ideal for maintaining enevex-sealed surfaces. Areas of application: Vehicles, Motorcycles, Caravans and Campers, Yachts and Boats.

Properties:

Good hydrophobic properties
Increases gloss and smoothness
Resistant to weak acids and bases
Easy application
Streak-free gloss
Silicone-free

Application: After washing, spray enevex® WH31 Wet Coating directly onto wet surfaces (do not allow to dry). Then rinse the product thoroughly with a medium-strength/soft water stream (pressure washer from 1.0 to 1.5 meters away). After rinsing, dry the surfaces with a microfiber towel (enevex® DT24 Dry Towel). Service Life: enevex® WH31 Wet Coating provides protection for about 6 to 8 weeks. Applying a second layer after 60 minutes increases the protection by approximately 80 to 90%. Caution: Do not apply in direct sunlight or allow the product to dry. Protect from direct sunlight and freezing temperatures.

Weatherproof after: 30 minutes
Fully cured after: 12 hours
pH Resistance: 10.5

Consumption	15 – 20 ml / m²
Application temperature:	+5°C ile + 40°C
Weatherproof:	After 30 minutes
Fully cured:	After 12 hours
Lifetime:	6 to 8 weeks – Applications in a cycle of 2 to 3 weeks increases the protection by approx. 70 to 80 %
pH resistance:	pH 10.5
Storage and shelf life:	At least 18 months at ambient temperature in tightly sealed original container
Areas of use	Cars, Motorbikes, Caravans, Boats and Yachts, Buses and Vans

Note after use: Coating products require time to bond with the surface and fully cure. Surfaces treated with sealing products should always be cleaned as gently as possible to prevent damaging or removing the product. Avoid using strong cleaning agents with a high pH or a high concentration of solvents. Factors such as product processing (pre-cleaning, temperature, drying time) may influence the product’s effectiveness and durability. Therefore, we recommend using a pH-neutral shampoo for cleaning.

Accessories: enevex® Applicator Sponge, enevex® CT23 Ceramic Towel, enevex® PT36 Polishing Towel

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.