enevex® am’P Aeroplane Metal Protection
enevex® am’P Aeroplane Metal Protection is suitable for many types of aircraft surfaces. Due to its low material consumption, enevex® am’P Aeroplane Metal Protection is particularly suitable for large surface applications. It effectively protects against damage caused by resins, salts, acids, weather conditions, and mechanical impacts. enevex® am’P Aeroplane Metal Protection is strong, hard and extremely heat-resistant up to +1090 °C. enevex® am’P Aeroplane Metal Protection also possesses “self-healing” properties. During development, we prioritize optimal compatibility with human health and the environment. Application Areas: Suitable for many types of aircraft surfaces.
Properties:
- UV resistant and environmentally-stable
- Saltwater-proof
- Anti-graffiti effect and protection against almost all acids, bases, and organic solvents
- Resistant to temperatures from -50°C to + 1,090°C
- Resistant to chemicals (pH 2-13)
- Increases hardness and scratch resistance
- Non-flammable and non-corrosive
- Increases hardness and scratch resistance, with very high abrasion resistance
- Provides corrosion protection
- Easy-to-clean
Application:
- Clean the area to be treated and remove any grease.
- Place the application cloth over the applicator.
- Apply 12-18 drops of enevex® am’P Aeroplane Metal Protection onto the application cloth and spread it evenly over the surface.
- Let the product evaporate for 1-2 minutes.
- Remove any excess using the enevex® CT23 Ceramic Towel.
- The product can also be optimally applied using fine spray application. On rough and absorbent surfaces, it can be applied by spraying or rolling.
- The product is dust-dry after 120 minutes.
- Important: Do not apply directly under sunlight. Protect the product from direct sunlight and frost.
- Once cured, the coating is resistant to acids, alkalis, and solvents with a pH value between 2 and 13.
- Recoating with Metal Protection: possible after 20 minutes. Wait no longer than 35 minutes.
Important:
- Protect the surface after treatment for at least 18 – 24 hours from dirt and moisture.
- Curing time can be shortened by approx. 2 – 3 days using separate drying.
- Air humidity must be within the range of 30 % to 80 %
- Consumption: smooth surfaces 4 – 8 ml / m2 absorptive/open-pored surfaces (absorbent 1-layer paints) 5 – 10 ml / m²
- The surface must not be exposed to any abrasion during curing!
| Consumption: | 4-8 ml/m² on smooth surfaces – 5-10 ml/m² open-pored surfaces |
| Application temperature: | +10°C ile + 35°C |
| Weatherproof after: | 18 to 24 hours at +20°C |
| Fully cured: | At ambient temperature: after approx. 6 to 8 days |
| Storage and shelf life: | At least 12 months at ambient temperature in tightly sealed original container |
| Areas of use: | AERO |
Technical explanations: Aeroplane Metal Protection is the following properties with a film thickness of 3 to 5 micrometers. (film thickness depends on the application procedure): Water-repellency of clean, empty, polished or painted surfaces. (The surface must be free of silicone and grease. Suitable cleaning agents are enevex AT10 & Pre-Clean). Optimizing of the coated substrate’s surface hardness. The coating has “self-healing” effects due to the unique manufacturing formulation (organic/inorganic components). No other coating system has these thermoelastic flow properties. Even parts exposed to a continuous stress of up to 1050 °C can be successfully sealed thanks to the high proportion of inorganic matter (standard formulation).
General Area Cleaning and Care Products
Değerlendirmeler
Henüz değerlendirme yapılmadı.